What certifications should a crib have?

All cribs sold in the US should be compliant with regulations as laid out by the Consumer Product Safety Commission (CPSC), and some will also comply with standards laid out by the Juvenile Product Manufacturers Association (JPMA), and the American Society for Testing and Materials (ASTM).

What are the safety requirements for cribs?

No more than 2 3/8 inches (about the width of a soda can) between crib slats so a baby’s body cannot fit through the slats; no missing or cracked slats. No corner posts over 1/16th inch high so a baby’s clothing cannot catch. No cutouts in the headboard or foot board so a baby’s head cannot get trapped.

What is JPMA certification?

JPMA certification seal means that a baby product has been tested by an independent facility and met the guidelines set by standards developer ASTM International. JPMA is a national trade association of 300 companies that make and/or import baby products, that administers a program that certifies manufacturers.

What are the requirements for a baby crib?

Why Are Old Cribs Dangerous?

  • Corner posts should not be higher than 1/16″.
  • Cribs must have fixed sides. …
  • Slats should be no more than 23/8″ apart (about the width of a soda can).
  • The mattress should be firm and tight-fitting. …
  • There should be no design cutouts in the headboard or footboard.
IT IS INTERESTING:  Question: Can baby have raw tomatoes?

Is greenguard better than JPMA?

JPMA, or the Juvenile Products Manufacturers Association, has advocated for safe baby products for over 40 years. … The JPMA certification differs from the GREENGUARD gold certification in that it focuses on meeting a bar of functionality and performance rather than a level of emissions.

Why are drop-side cribs illegal?

15, 2010 — The Consumer Product Safety Commission is banning cribs with drop-down sides because they have been blamed for the deaths of at least 32 infants since 2001. … The new rules also will prohibit drop-side crib use at motels, hotels, and child care facilities.

Can baby’s legs get stuck in crib slats?

It is somewhat common for babies to get caught in the crib. According to ChildrensMD, babies who are 7 to 9 months old are particularly prone to getting legs or feet stuck in the slats of the crib. … As long as the crib meets the CPSC standards, a foot or leg might get caught between the slats, but nothing more.

What is the difference between Greenguard and Greenguard gold?

Greenguard Gold products emit lower VOCs than standard Greenguard products. In 2005, this certification was developed as the Greenguard Children and Schools Certification Program, certifying products for daycares, schools, and hospitals. In 2011, the name was changed to Greenguard Gold for a broader appeal.

Should a crib be JPMA certified?

All cribs sold in the US should be compliant with regulations as laid out by the Consumer Product Safety Commission (CPSC), and some will also comply with standards laid out by the Juvenile Product Manufacturers Association (JPMA), and the American Society for Testing and Materials (ASTM).

IT IS INTERESTING:  How many hours should a toddler be in daycare?

Which bassinets are JPMA certified?

List of JPMA Certified Bassinets

  • Arm’s Reach Concepts Cambria Co-Sleeper.
  • Arm’s Reach Concepts Mini Ezee 2 -in-1 Bedside Bassinet.
  • Arm’s Reach Concepts Ideal Ezee 3-in-1 Bedside Bassinet.
  • Baby Bjorn Cradle.
  • Delta Children Sweet Beginnings Bassinet.
  • Delta Children Deluxe Gliding Bassinet.
  • Delta Children Rocking Bassinet.

Where do you put a crib in a room?

The best place to put the crib is near the door of your baby’s room so you can quickly reach them when you’re stumbling around in the middle of the night, or in case of an emergency. Also, follow these safety guidelines as you place the crib. Never put your baby’s crib near a window.

Can you sell a drop-side crib?

Today, it’s illegal to use or sell drop-side cribs — either new or secondhand. They’re also not permitted for use in business or community settings, even if they have been equipped with immobilizing hardware meant to stop the sliding functionality.

Is it safe to use a 30 year old crib?

The U.S. Consumer Product Safety Commission (CPSC) recommends against using a secondhand crib. If you do, they recommend not using a crib that is more than 10 years old. … Also, cribs that have been assembled, disassembled and reassembled over time may have worn out hardware, which can loosen, making the crib unsafe.

How important is Greenguard Certified?

Products that are certified by Greenguard have to meet stringent standards and emission limits for indoor use. … You can rest assured that any product with the Greenguard Gold certification will not emit significant chemical compounds into the air. These products are the perfect choice for a nursery!

IT IS INTERESTING:  Which cerelac is good for baby?

Does greenguard test for lead?

Thank you for contacting UL Environment. GREENGUARD tests for chemical emissions rather than content so lead and phthalates are outside of our scope of testing. You may want to contact the manufacturer directly to see if they have done any content testing for these chemicals.

What cribs are Greenguard Certified?

Overview of GREENGUARD Gold Certified Brands

  • DaVinci (The Most Affordable)
  • Babyletto (The Most Complete, Conversion Kits Included)
  • Silva Furniture (The Most Elegant)
  • Green Cradle (The Most Natural)

22.12.2020

Mom Share